EZ Kleen Preventative Maintenance Fluid 4L
This fluid assists in reducing the blockages in Ultratec’s Award Winning Rapid Change Technology Heat Exchangers. It is a great Preventative Maintenance Fluid and Process. It is recommended to run EZ Kleen for 5-6 minutes in your Ultratec Fog Machines after 8-12 hours of operation. Then run Ultratec’s Fog Fluid for 2 minutes to complete the cleaning cycle. When using EZ Kleen on a regular basis will help extend the life of the block. It can be used in all Ultratec’s Fog Machines.
*Do not use EZ Kleen in the Radiance Haze Machine or the Radiance Touring System.
Specifications
SAFE FOR USE ON LIVE STAGE PERFORMANCES
Our fluid has been included in the "Equipment Based Guidelines for the Use of Theatrical Smoke and Haze" that has been prepared with the support of Equity League Pension and Health Trust Funds et al., and can be used in compliance with ANSI standards for theatrical fog and the PLASA (previously ESTA) Fog Testing Program.
To view the Calibration Factors for Monitoring Theatrical Smoke, Fog and Haze please see the "Downloads" section further down this page.
Specification Footnote:Instructions
1. Run EZ Kleen through machine after 8-12 hours of operation for 5-6 minutes.
2. Then use any Ultratec Fog Fluid for 2 minutes.
If you have any concerns please contact Ultratec service.
Shipping Specifications per Model
Mode lLength Width Height Weight
CFF-2801 4L EZ Kleen Solution 15 in - 38 cm11 in - 28 cm13 in - 33 cm40 lbs - 18 kgs