Antari W-508 Effect
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.
Features
● Intelligent Wireless Control System
Each machine comes with a set of wireless receiver and transmitter as a standard controller. The working distance of wireless control is 50 meters in open area.
● Opto-electronic Fluid Sensor
When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect the pump from burning.
● More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles. This leads to a fairly low fog fluid consumption. Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.
● New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between – 20 and + 60 degree Celsius.
Specification
Input voltage | US model : AC 100-120V, 50/60HZ 6.7A |
| EU model : AC 220-240V, 50/60Hz 3.5A |
Rated power | 800 W |
Warm-up time | 2 minutes (approx) |
Fluid consumption | 13 ml/min |
Fluid tank capacity | 0.8 Liters (0.21 gallon) |
Compatible fluid | Antari FLG Heavy Fog Fluid |
| Antari FLR Light Fog Fluid |
Operating time | 60 mins at max. output |
Ambient temp.range | 0°C - 40°C (32°F - 104°F) |
Control | Manual, Wireless |
Dimension | L 315 W 128 H 218 mm |
| (L 12.40 W 5.04 H 8.58 inch) |
Weight | 3.8 kg (8.38 lbs) |
